Three Piece SVG Box Template Assembly Instructions

This page gives written and video instructions for assembling all of our “Three Piece” SVG box templates.

Three Piece SVG Box Template

Cut the templates using a cutting machine or scissors.
Fold on all the dotted guide lines to create creases.
Place glue and / or two sided tape on the outside of the small bottom tabs.
Adhere one tab to the inside of the bottom panel.

2. Three Piece SVG Box Template - Place adhesive on small bottom tabs

TIPS:
If the templates get mixed up, you should NOT have two side tabs facing each other.
Angles of two smaller templates should fit without overlapping. If you zoom in on the first pink picture you will see they line up next to each other. The second pink picture shows how the wrong assembly will overlap.

SVG Box Template - Check tabs should not be on the same side

Adhere the small bottom tab on the last template to the inside of the bottom panel.
Optional – Place a weight on the template until the bottom dries. This will help keep the pieces from shifting while assembling the sides.
Place adhesive on the outside of the side tabs.
Join the side tabs to the inside of the adjacent sides.

3b. Three Piece SVG Box Template - Adhere other small tab to the inside of bottom panel

Three Piece SVG Box Template - Place adhesive on side tabs

Optional – Add clips to the corners while they dry.
The outside corners should be flush.

6. Three Piece SVG Box Template - Optional - Add clips to hold while drying

5b. Three Piece SVG Box Template - Outside of box should line up on corners

The inside bottom of the box will have seams.
You can cover the seam with the Free SVG Support Panel.
The outside bottom of the box will be solid without seams.

Three Piece B SVG Box Template

Cut the templates using a cutting machine or scissors.
Fold on all the dotted guide lines to create creases.
Place glue and / or two sided tape on the outside of the small side tabs.
Adhere the tab of one side to the inside of the other side panel.

Three Piece B SVG Box Template - Place adhesive on small tabs

Adhere the second side tab to the inside of the first panel.
Optional – Lie the template flat on its side and place a weight on the template until the sides are dry. This will help keep the sides from shifting while assembling the bottom.
Place adhesive on the bottom small tabs.

3b. Three Piece B SVG Box Template - Adhere other small tab inside of adjacent side

SVG Box Template - Optional - Place weight on the template until sides are dry.

Place the bottom panel on top of the tabs.
Optional – Place weight on the box until it dries. This will help the bottom to dry flat.

7. SVG Box Template - Optional - place weight on the bottom until dry

The inside bottom of the box will have seams.
You can cover the seam with the Free SVG Support Panel.
The outside bottom of the box will be solid without seams.